1.Bed part The bed body is completely independently researched and developed. The bed base is welded by a square tube and processed by a large gantry milling machine. We have many years of processing experience for large-scale machine bed, high temperature annealing to eliminate stress and natural failure treatment, internal After the partial stress is released, finish machining is performed to ensure machining accuracy! The parallelism of each machine bed out of the factory is less than 0.02mm. Only with a solid bed can an efficient and high- precision cutting speed be guaranteed!
Features and advantages: ① The machine base is thick and stable, stable and reliable under high acceleration; ② Use multi-channel bottom automatic partition dust removal, so that there is nowhere to hide the smoke and dust; ③ Automatic lubrication and refueling, uniform and consistent refueling, eliminating the trouble of manual refueling; There is a waste car at the bottom of the cutting area, which can be pulled out regularly to clean up the waste; 2.Beam Section The beam adopts aluminum structure, which greatly improves the stability of the machine tool.
It adopts heavy-duty steel mold pressure casting; the mold cost is high but the life is long, and the aluminum water has good fluidity and uniform density. High strength; elimination of casting defects such as blisters; good surface roughness, no processing required for non-installation surfaces; cost
Low and high strength of the protective casting skin; the pressure casting wall thickness can be 10mm without affecting the strength. Heavy Lightweight, small inertia, and good dynamic performance. (Pictures are for reference only, product updates without notice)
3. The wireless handle control operation is simpler and more efficient The operation is simple, the machine can be remotely controlled to cut, Punching, moving, calibration, emergency stop and other operations. (Pictures are for reference only, product updates will not be notified separately)
